Diamond Pro Stone Cut® Retaining Wall System
Renowned for its rough-hewn face and earthen tones, our Diamond Pro Stone Cut® retaining wall system imparts a rich, faceted appearance not commonly found in commercial retaining walls. The performance characteristics of this concrete cut stone wall block make it the proven solution for tall walls, Department of Transportation projects, commercial developments, water applications and other critical wall needs. DOT approvals vary by state.
Project Applications
- DOT
- Terraced Walls
System Performance
Max. Gravity Wall Height: 4’0”
System Batter: 7.1°
Min. Inside Radius: 7’0”
Min. Outside Radius: 4’0”
The Anchorplex™ Retaining Wall System
The Anchorplex™ retaining wall system offers a unique, nonconventional solution to problematic wall construction sites. It is a retaining wall built with Anchor™ products and self-compacting structural backfill specified by Anchor Wall Systems, and backed by engineering support tools developed by Anchor.
When used in combination with blocks of the appropriate shape, the structural backfill attaches itself to the wall facing, effectively extending the depth and increasing the mass of the facing. In addition to reinforcing the block facing, the structural backfill zone also serves as the required drainage zone.
Using the Anchorplex retaining wall system completely eliminates the need for the construction of a mechanically stabilized earth zone behind the wall facing and requires substantially less excavation than is usually necessary in grid-reinforced wall construction.
Because of these efficiencies and the design flexibility afforded with the Anchorplex system, millions of square feet of such walls have been installed and are successfully performing worldwide.
Information in this section is typical and should not be used for construction without the seal, when required, of a registered Professional Engineer in the state in which the wall will be constructed.
* Timestamps *
0:04 Introducing the Anchorplex retaining wall system
0:17 Explaining structural backfill
0:52 Placing a drain pipe
0:56 Placing structural backfill
1:46 Capping and finishing the wall
Available Units
Actual dimensions and weights may vary from these approximate values due to variations in manufacturing processes. Specifications may change without notice. Please visit your dealer for color options, block dimensions and additional information.
8" Large Block
Height:
0’8”
Front Length:
1’6”
Depth:
1’0”
Weight:
77lbs
Front Coverage:
1.0 sq. ft.
Setback:
1"
8" Medium Block
Height:
0’8”
Front Length:
0’11”
Depth:
1’0”
Weight:
45lbs
Front Coverage:
0.61 sq. ft.
Setback:
1"
8" Small Block
Height:
0’8”
Front Length:
0’7”
Depth:
1’0”
Weight:
34lbs
Front Coverage:
0.39 sq. ft.
Setback:
1"
8" Corner
Height:
0’8”
Front Length:
1’6”
Depth:
0’9”
Back Length:
1’6”
Weight:
101lbs
Front Coverage:
1.0 sq. ft.
Cap
Height:
0’4”
Front Length:
1’5.25”
Depth:
0’10.4”
Back Length:
1’0”
Weight:
47lbs
Front Coverage:
0.48 sq. ft.
Torpedo® Base Block
Height:
0’4”
Front Length:
1’3.75”
Depth:
0’11”
Weight:
47lbs
Front Coverage:
0.44 sq. ft.